-
شماره ركورد
17016
-
شماره راهنما(اين فيلد مربوط به كارشناس ميباشد لطفا آن را خالي بگذاريد)
17016
-
پديد آورنده
سعيد گودرزي طائمه
-
عنوان
بررسي تاثير ژئوتكستايل بر خواص مكانيكي ماسه كربناته هرمز
-
مقطع تحصيلي
كارشناسي ارشد
-
رشته تحصيلي
ژئوتكنيك
-
تاريخ دفاع
آبان ماه 1395
-
استاد راهنما
دكتر شاه نظري
-
دانشكده
عمران
-
چكيده
چكيده
ماسه موجود در سواحل جنوب كشور از نوع كربناته مي¬باشد و تحقيقات انجام شده بر اين ماسه-ها نشان داده است كه رفتار اين خاك¬ها تحت برش، متفاوت با خاك¬هاي سيليكاته مي¬باشد. اين نوع ماسه¬ها اغلب به شكل صفحات منحني يا دانه¬هاي توخالي با منشاء موجودات زنده دريايي بوده كه سطح زبري دارند. علي¬رغم انجام تحقيقات و آزمايش¬هاي فراوان در زمينه بهسازي ماسه سيليكاته بوسيله ژئوتكستايل، هيچ¬گونه تحقيقي در مورد تسليح ماسه كربناته در ادبيات فني موجود نمي¬باشد، در همين راستا تعدادي آزمايش سه محوري مونوتونيك زهكشي شده بر روي ماسه خالص و ماسه مسلح شده با لايه¬هاي افقي ژئوتكستايل انجام شد. در اين پژوهش علاوه بر مشاهده تأثير عوامل متعددي چون تعداد لايه هاي ژئوتكستايل، نحوه آرايش آن¬ها، درصد تراكم خاك، نوع ژئوتكستايل و فشار محصوركننده، آزمايش¬ها با دو دانه¬بندي مختلف انجام شد تا نحوه تاثير دانه¬بندي در مسلح¬سازي ماسه كربناته بوسيله ژئوتكستايل بررسي گردد.
نتايج نشان مي¬دهد افزودن ژئوتكستايل باعث افزايش مقاومت حداكثر و كرنش نقطه تسليم ماسه كربناته شده و افت مقاومت پس از نقطه حداكثر را كاهش مي¬دهد. ميزان بهبود خواص مقاومتي ماسه مسلح شده با افزايش فشار محصوركننده و بزرگ¬تر شدن اندازه دانه¬ها كاهش مي¬يابد. با افزايش تراكم نسبي نمونه به دليل افزايش قفل¬شدگي، مقاومت حداكثر ماسه مسلح افزايش مي-يابد. اين روند مادامي ادامه دارد كه ژئوتكستايل در نمونه گسيخته نشود. لازم به ذكر است تسليح ماسه بوسيله ژئوتسكتايل مد گسيختگي را از حالت سطح مشخص به حالت خمره¬اي تغيير مي¬دهد.
واژههاي كليدي: رفتار برشي، ماسه كربناته، ژئوتكستايل، آزمايش سه محوري، تسليح ماسه
-
تاريخ ورود اطلاعات
1396/01/16
-
تاريخ بهره برداري
1/1/1900 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
اعظم صادقي
-
چكيده به لاتين
Abstract:
Shores of south Iran are covered with calcareous sand, researches indicate that the shear behavior of these sands are different in compare to siliceous sands. This type of soil usually consists hollow grains or curved plates which has been formed from the remains of marine organisms. Extensive research and testing have been done to determine the behavior of siliceous sand reinforced with geotextile but no research regarding behavior of geotextile-reinforced calcareous sand exists. To bridge this gap a series of monotonic triaxial tests have been done on cleaned calcareous sand and sand reinforced with horizontal layers of geotextile. In this research in addition to investigating the effect of geotextile arrangement, relative density of soil, geotextile type and confining pressure, tests have been done on two grain size distributions to determine effect of grain size on mechanical behavior of geotextile-reinforced sand.
Results prove that reinforcing sand with geotextile has an increase in peak strength and axial strain at failure and reduces loss of post-peak strength. With an increase in confining pressure and grain size a decrease in improvement of reinforced soil is reported. By increasing relative density of the samples due to enhanced interlocking, peak strength of reinforced sand increases. This process continues as long as the geotextile is not ruptured. It should be noted that reinforcing sand with geotextile changes failure pattern from specific shear plane to bulging among geotextile layers.
Keywords: Shear behavior; Calcareous sand; Geotextile; Triaxial test; Sand reinforcement
-
لينک به اين مدرک :