شماره ركورد
20962
شماره راهنما(اين فيلد مربوط به كارشناس ميباشد لطفا آن را خالي بگذاريد)
۲۰۹۶۲
پديد آورنده
رامين اسدي
عنوان
ساخت سلول خورشيدي با لايه جاذب پروسكايت با غلظت هاي مختلف متيل آمونيوم يديد
مقطع تحصيلي
كارشناسي ارشد
رشته تحصيلي
فيزيك - حالت جامد
سال تحصيل
۱۳۹۵
تاريخ دفاع
۱۳۹۸/۰۳/۱۹
استاد راهنما
دكتر محمدرضا زماني ميميان
استاد مشاور
دكتر محسن عامري
دانشكده
فيزيك
چكيده
چكيده
در سال هاي اخير، دسته اي از تركيبات هيبريد آلي-معدني با ساختار بلوري پروسكايتي گسترش پيدا كردند كه در بين آنها نيمه رساناهاي پروسكايتي با تركيب شيميايي (X=I¸ Br¸Cl)CH3NH3PbX3 پتانسيل بالايي به عنوان جاذب نور براي كاربرد در سلول هاي خورشيدي از خود نشان دادند. گاف انرژي مستقيم، ضريب جذب بالا و تحرك پذيري بالا، اين مواد را به جاذب هاي مناسبي در سلول هاي خورشيدي تبديل كرده است.
در اين پژوهش، براي لايه نشاني پروسكايت، از روش لايه نشاني دو مرحله اي استفاده شد. در مرحله اي اول محلول سرب يديد به روش لايه نشاني چرخشي بر روي لايه متخلل تيتانيوم دي اكسيد قرار گرفت. در مرحله اي دوم با روش لايه نشاني چرخشي به منظور بهبود عملكرد سلول، محلول متيل آمونيوم يديد با غلظت هاي مختلف بر روي سرب يديد نشانده شد. براي اين سلول ها، آناليزهاي SEM، UV-VIS، XRD و IV انجام گرفت و نتيجه ي اين دو مرحله لايه نشاني در نهايت در شرايط بهينه، بيشينه ي بازدهي501/6 درصد از اين سلول ها حاصل شد.
تاريخ ورود اطلاعات
1398/06/03
عنوان به انگليسي
Fabrication of absorptive layer of perovskite with different concentration of methyl ammonium iodide (CH3NH3I) used in solar cell
تاريخ بهره برداري
6/8/2020 12:00:00 AM
دانشجوي وارد كننده اطلاعات
رامين اسدي
چكيده به لاتين
Abstract:
In recent years, a class of inorganic-organic hybrid compounds with a perovskite crystal structure was developed. Among them, perovskite semiconductors with CH3NH3PbX3(X=I,Br,Cl) composition have recently shown great for application in photovoltaic solar cells, in particular as the light absorbing layer. A direct band gap, strong light absorption, and high carrier mobility make them excellent absorber in solar cells. In this research, two step deposition technique was used to fabricate and modify perovskite solar cells. In first step, PbI2 solution deposited on TiO2 by spin coating method. In the second step, using a rotary layer deposition method, a solution of methyl ammonium iodide with different concentrations on iodide lead was introduced to improve cell function. For these cells, the SEM, UV-VIS, XRD and IV analyzes were performed and the result of these two steps of the layer deposition was ultimately achieved in optimal conditions, with a maximum efficiency of 6.501% of these cells.
Keywords: solar cells, inorganic-organic hybrid perovskite compounds, solution deposition process