-
شماره ركورد
31512
-
پديد آورنده
احمد زحمتكشان
-
عنوان
ساخت و بررسي آئروژل اكسيدهاي فلزي براي جذب آسفالتن
-
مقطع تحصيلي
كارشناسي ارشد
-
رشته تحصيلي
مهندسي شيمي
-
سال تحصيل
1399
-
تاريخ دفاع
1403/06/26
-
استاد راهنما
امين بازياري
-
استاد مشاور
امين بازياري
-
دانشكده
مهندسي شيمي
-
چكيده
در صنعت نفت، آسفالتنها بهدليل ايجاد مشكلات متعدد مرتبط با جذب آنها در سطح مشترك مايع-مايع و جامد-مايع در عمليات استخراج، ارتقاء و حمل و نقل در طول توليد نفت خام شناخته شدهاند. در اين پژوهش آلومينا آئروژل با استفاده از دستگاه خشككن فوق بحراني سنتز و عملكرد آن در جذب آسفالتن استخراج شده از نفت خام بررسي گرديد. در بخش اول پژوهش دماي بهينه كلسيناسيون جاذب بررسي و بهترين عملكرد جاذب مربوط به دماي 500 درجه سانتيگراد بود كه توسط آناليز طيفسنجي مرئي و ماوراءبنفش مشخص گرديد؛ به طوري كه بيش از 66 درصد از آسفالتن محلول مدل توسط جاذب مذكور جذب شد. در بخش دوم تحقيق، آلومينا آئروژل به روش زيروژل سنتز و در دماي 500 درجه سانتيگراد كلسينه شد. همچنين جاذب آلومينا به روش سلسله مراتبي سنتز و نيز در دماي 500 درجه سانتيگراد كلسينه شد. همچنين چهار نمونه صنعتي آلومينا خريداري و در دماي 500 درجه سانتيگراد كلسينه شدند. آناليز طيفسنجي مرئي و ماوراءبنفش نشان داد كه در بخش دوم تحقيق، جاذب آلومينا به روش سلسله مراتبي بيشترين جذب را انجام داد به عبارتي بيش از 60 درصد از آسفالتن محلول مدل توسط اين جاذب، جذب شد اين در حاليست كه آلومينا آئروژل سنتزشده با استفاده از دستگاه خشككن فوق بحراني در دماي بهينه كلسيناسيون 500 درجه سانتيگراد جذب آسفالتن بيشتري نسبت به ساير نمونهها دارد به طوري كه حدود 6 درصد آسفالتن بيشتري نسبت به جاذب آلومينا به روش سلسله مراتبي، جذب كرد و ميتوان گفت بهترين عملكرد جذب را نسبت به ساير جاذبها دارد.
-
تاريخ ورود اطلاعات
1403/08/21
-
عنوان به انگليسي
Fabrication and Investigation of Metal Oxides Aerogel for Asphaltene Adsorption
-
تاريخ بهره برداري
1/1/1900 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
احمد زحمت كشان
-
چكيده به لاتين
In the oil industry, asphaltenes are known for causing various issues due to their adsorption at liquid-liquid and solid-liquid interfaces, which complicates extraction, upgrading, and transportation during crude oil production. In this study, alumina aerogel was synthesized using a supercritical dryer, and its performance in adsorbing asphaltenes extracted from crude oil was evaluated. In the first part of the research, the optimal calcination temperature of the adsorbent was investigated, and the best performance was found at 500°C; as determined by UV-Vis spectroscopy analysis, Over 66% of the asphaltenes from the model solution were adsorbed by this adsorbent. In the second part of the study, alumina aerogel was synthesized using the xerogel method and calcined at 500°C. Additionally, The alumina adsorbent was synthesized using a hierarchical method and calcined at 500°C. Four industrial alumina samples were also purchased and calcined at 500°C. UV-Vis spectroscopy analysis indicated that, in the second part of the study, alumina adsorbent synthesized by the hierarchical method exhibited the highest absorption, capturing more than 60% of the asphaltenes from the model solution, capturing more than 60% of the asphaltenes from the model solution. However, the alumina aerogel synthesized using the supercritical dryer device at the optimal calcination temperature of 500°C adsorbing more asphaltenes than other samples so that it adsorbed about 6% more asphaltenes than the hierarchical alumina adsorbent and it can be said that it has the best adsorption performance compared to other adsorbents.
-
كليدواژه هاي فارسي
آسفالتن , آلومينا آئروژل , خشككن فوق بحراني , كلسيناسيون , جذب
-
كليدواژه هاي لاتين
Asphaltene , Alumina Aerogel , Supercritical Dryer , Calcination , Adsorption
-
Author
ahmad zahmatkeshan
-
SuperVisor
Dr. amin bazyari
-
لينک به اين مدرک :