-
شماره ركورد
17577
-
شماره راهنما(اين فيلد مربوط به كارشناس ميباشد لطفا آن را خالي بگذاريد)
17577
-
پديد آورنده
مسعود رضايي
-
عنوان
مطالعه تجربي فرآيند جوشكاري نفوذي فلزات غير همجنس
-
مقطع تحصيلي
كارشناسي ارشد
-
رشته تحصيلي
ساخت و توليد
-
تاريخ دفاع
بهمن ماه 1395
-
استاد راهنما
دكتر محمد صديقي
-
دانشكده
مكانيك
-
چكيده
چكيده
امروزه كاربرد ورقهاي ساخته شده از فلزات غير همجنس در صنايع گوناگون اهميت فراواني يافته است. بهرهبرداري همزمان از خواص فيزيكي، مكانيكي و متالورژيكي اين مواد سبب كمك به صنايع مختلف جهت تصميمگيري بهتر ميشود. در اين پاياننامه، اتصال آلياژهاي غير همجنس و با قابليت جوشپذيري پايين آلومينيوم 6061 و منيزيم AZ91-D به روش جوشكاري نفوذي در حالت جامد مورد مطالعه قرار گرفته است. در گام نخست، امكان ايجاد جوش نفوذي حالت جامد بين دو فلز غير همجنس مذكور بدون استفاده از لايه واسط و با بهرهگيري از روش پرس گرم تحت خلأ براي اولين بار مورد بررسي قرار گرفته است. در اين گام شرايط مناسب فرآيند شامل ميزان دما و فشار اعمالي جهت ايجاد اتصال مطلوب مشخص گرديده است. در ادامه به بررسي تأثير زبري سطوح بر كيفيت اتصال از جنبه خواص مكانيكي و ريز ساختاري پرداخته شده است. خواص مكانيكي به كمك آزمونهاي استحكام برشي و ريزسختي مورد ارزيابي قرار گرفته است. همچنين تركيبات بين فلزي ريز ساختاري و ميزان پهناي باند اتصال در فصل مشترك دو فلز با استفاده از ميكروسكوپ- هاي الكتروني روبشي و نوري بررسي شده است. تغييرات زبري سطوح به وضوح بر ميزان استحكام برشي اتصالات، مقدار ريزسختي و همچنين نوع تركيبات بين فلزي تأثيرگذار است. نتايج نشان دهنده آن است كه به صورت كلي با كاهش زبري سطح تماس دو فلز، استحكام برشي بيشتر شده و سختي كاهش مييابد.
واژههاي كليدي: جوشكاري نفوذي، فلزات غير همجنس، آلومينيوم 6061 ، منيزيم AZ91-D ، پرس گرم، خواص مكانيكي و ريز ساختاري.
-
تاريخ ورود اطلاعات
1396/04/17
-
تاريخ بهره برداري
1/1/1900 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
مسعود رضايي
-
چكيده به لاتين
Abstract:
Nowadays, application of sheets with dissimilar materials has gained great importance in different industries. Exploitation of physical, mechanical and microstructural properties of these materials helps various industries for decision making. In this dissertation, a specific process in the solid state such as diffusion welding process is used for welding of dissimilar alloys (Al-6061 and Mg-AZ91-D) with low weldability. First, the process feasibility is studied to create a solid-state diffusion welding by using vacuum hot pressing method with no interlayer. The suitable conditions such as temperature and pressure were extracted to secure the bond. Then, the effect of surface roughness on the quality of the bond from mechanical properties and microstructure aspects were investigated. The mechanical properties were evaluated by using shear strength and micro-hardness. Also, the evolution of the intermetallic microstructure and the bond width were investigated with optical microscopes and scanning electron microscopy. The surface roughness variation clearly influences the shear bonds strength, micro-hardness and the type of intermetallic compounds. Results show that shear strength and hardness will be respectively increased and decreased by reducing the surface roughness.
Keywords: Diffusion welding; dissimilar metals; 6061 Aluminum; AZ91-D Magnesium; hot pressing; mechanical properties; microstructure.
-
لينک به اين مدرک :