-
شماره ركورد
19161
-
شماره راهنما(اين فيلد مربوط به كارشناس ميباشد لطفا آن را خالي بگذاريد)
۱۹۱۶۱
-
پديد آورنده
نويد توراني
-
عنوان
شناسايي آنلاين سازه ها با استفاده از داده هاي محدود
-
مقطع تحصيلي
ﮐﺎرﺷﻨﺎﺳﯽ ارﺷﺪ
-
رشته تحصيلي
سازه
-
سال تحصيل
۱۳۹۵
-
تاريخ دفاع
1397/4/6
-
استاد راهنما
دكتر فريدون اميني
-
استاد مشاور
دكتر پدرام قادري
-
دانشكده
عمران
-
چكيده
در اين تحقيق، در بخش اول با استفاده از مفهوم ميراگرهاي نيمه فعال، روشي جهت كنترل يك سازه ي ده طبقه در برابر ارتعاشات شديد لرزه اي ارائه خواهد شد. ميراگر پيشنهادي قابليت انطباق با شرايط جديد پس از آسيب ديدگي سازه را خواهد داشت و در هر لحظه با حفظ اختلاف فاز بهينه ميان حركت ميراگر و سازه، عملكرد بهينه ي سيستم را تضمين خواهد كرد. در اين سيستم از هيچ گونه ميراگر ويسكوزي استفاده نمي شود، و انرژي ميراگر جرمي توسط يك پيستون بازنشاننده جذب و دفع خواهد شد. در بخش دوم تحقيق، با استفاده از داده هايي كه از حسگرهاي متصل به سازه در بخش كنترل دريافت مي شود، سازه مورد نظر شناسايي شده و پارامتر هاي مودال آن تخمين زده مي شوند. اين كار توسط يك الگوريتم حداقل مربعات به صورت آنلاين انجام خواهد گرفت. در اين بخش چندين مثال از سازه هاي دوبعدي از نوع برشي و چند مثال از مدل هاي سه بعدي تحت ارتعاشات لرزه اي حل شده است تا عملكرد الگوريتم تحت حالات مختلف آناليز شود. شناسايي سازه به صورت آنلاين و به موازات كنترل آن، امكان پايش وضعيت سازه و تنظيم بهينه ي كنترلگر را فراهم خواهد كرد.
-
تاريخ ورود اطلاعات
1397/04/17
-
عنوان به انگليسي
online identification of structures using limited data
-
تاريخ بهره برداري
7/8/2018 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
نويد توراني
-
چكيده به لاتين
In the first part of this research, a method using the concept of semi-active control has been developed to control a 10 story structure under strong seismic vibrations. The proposed damper is able to adapt to the new conditions after occurrence of a damage to the structure and in each moment, maintaining the optimal phase difference between the motion of the tuned mass damper and the structure, the optimal performance of the system is guaranteed. Conventional viscous dampers have not been used in this system and the energy of the TMD will be dissipated using a resettable chamber. In the second part of this research, using the data obtained from the sensors that are attached to the structure, the structure is identified and its modal parameters are estimated. This task has been carried out using a least square algorithm in an online manner. In this section, a number of example problems of 2D shear structures and 3D models have been analyzed under seismic vibrations, to analyze the performance of the algorithm under various scenarios. Online identification of structures in parallel to their control will make the monitoring of structure performance possible.
-
لينک به اين مدرک :