-
شماره ركورد
22708
-
پديد آورنده
نصيبه سعيدزاده اميري
-
عنوان
كاربرد نقاط كوانتومي هسته/ پوسته با پوشش پليمرهاي قالب مولكولي اپي توپي براي تهيه حسگر نوري جهت شناسايي و اندازه گيري ماكرومولكول ها
-
مقطع تحصيلي
دكتري
-
رشته تحصيلي
شيمي تجزيه
-
سال تحصيل
1392
-
تاريخ دفاع
1398/2/11
-
استاد راهنما
دكتر سيد محمدرضا ميلاني حسيني
-
دانشكده
شيمي
-
چكيده
در اين كار تحقيقاتي از حسگر نقاط كوانتومي پوشيده شده با پليمرهاي قالب مولكولي براي شناسايي و اندازه گيري برخي پروتئين ها استفاده گرديد. به منظور افزايش كارايي تهيه پليمرهاي قالب مولكولي، روش اپي توپي در فرآيند قالب گيري مورد استفاده قرار گرفته است. حساسيت روش نيز با استفاده از سيستم فلوئورساني تناسبي و مزوپروس كردن ساختار پليمرهاي قالب مولكولي، افزايش داده شده است. دراين كار تحقيقاتي، از دو روش به منظور تهيه حسگرهاي نقاط كوانتومي دوست دار محيط زيست استفاده شده است. در حسگرهاي ساخته شده با نقاط كوانتومي كادميوم تلوريد، از تابش مايكروويو به جاي روش هاي عادي گرمادهي به منظور سنتز نانوذرات با بازده كوانتومي بالا شده است كه اين كار باعث كاهش استفاده از تركيبات سمي در فرآيند سنتز نقاط كوانتومي مورد نظر و در نتيجه كاهش محصولات جانبي و پيش-سازهاي استفاده نشده فلزات سنگين گرديد. هم چنين استفاده از نقاط كوانتومي سولفيد روي دوپه شده با عناصر مختلف فلزات واسطه براي تهيه حسگر فلوئورسانس تناسبي، جايگزين مناسبي براي سيستم هاي تناسبي مرسوم كه با استفاده از نقاط كوانتومي كادميوم تلوريد تهيه مي شد، گشته و اين روش نيز باعث كاهش اثرات تخريبي زيست محيطي سيستم هاي تناسبي با استفاده از نقاط كوانتومي گرديد. اين دو دسته از نقاط كوانتومي به طور مجزا در تهيه حسگرهاي تناسبي با پوشش پليمر قالب مولكولي استفاده گرديده است. در مقايسه با سيستم هاي ساده فلوئورساني تك هسته اي و ساختارهاي قالب مولكولي غيرمزوپروس، حسگر پيشنهاد شده داراي حساسيت بسيار بهتري بوده، به طوري كه دامنه خطي در اندازه گيري پروتئين هاي پيشنهاد شده و فاكتور قالب گيري در اين روش در مقايسه با حسگر نقاط كوانتومي پوشيده شده با پليمرهاي قالب مولكولي ساده و غير مزوپروس افزايش يافته و حد تشخيص به طور چشم-گيري كاهش يافته است. از حسگر فلوئورسانس تناسبي با استفاده از نقاط كوانتومي پوشيده شده با پليمرهاي قالب مولكولي اپي توپي مي توان براي اندازه گيري پروتئين هاي پيشنهادي در نمونه هاي بيولوژيكي و ساير نمونه هاي حقيقي با ماتريس پيچيده بدون نياز به هرگونه پيش آماده سازي استفاده نمود.
-
تاريخ ورود اطلاعات
1399/07/20
-
عنوان به انگليسي
An Optical Sensor for Identification and Determination of Macromolecules by Core/Shell Quantom Dots Coated by Epitopial Molecularly Imprinted Polymer
-
تاريخ بهره برداري
5/1/2021 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
نصيبه سعيدزاده اميري
-
چكيده به لاتين
In this research work, quantum dots capped molecularly imprinted polymer sensors was utilized for identification and determination of some proteins. In order to improve the efficiency in the synthesis of molecularly imprinted polymers, epitope technique was used in imprinting process. The sensitivity of the sensor was also improved using ratiometric fluorescence technique and mesoporous structured molecularly imprinted polymers.
In this work, two methods have been employed in order to prepare eco-friendly quantum dots based sensors. Application of microwave irradiation instead of conventional heating methods leads to the synthesis of CdTe quantum dots with high quantum yields and and reduces the use of toxic compounds in the process of synthesizing the desired quantum dots and, as a result, reduces the by products and unused metal precipitators. Also, application of different transition metal doped ZnS quantum dots for fabrication of ratiometric fluorescnce probe, is a suitable alternative for conventional ratiometric systems that was prepared using quantum cadmium telluride quantum dots and this method also reduces environmental degradation effects of ratiometric systems using quantum dots as a fluorescnce dyes. These two groups of quantum dots have been used separately for the preparation of ratimetric sensors capped molecularly imprinted polymers. Compared with single fluprescnece and non-mesoporous strctured epitope imprinted polymers, the suggesetd sensor exhibits better sensitivity, so that the linear range in determination of proposed proteins and the imprinting factor increased and the detection limit decreased significantly.
The ratiometric fluorescnce sensor based quntum dots coated epitope imprinted polymers can be used for quantification of proposed proteins in biological samples and other real samples with complex matrices without any pretreartments.
-
لينک به اين مدرک :