-
شماره ركورد
23712
-
پديد آورنده
محدثه شهرياري پور
-
عنوان
سنتز نانوذرات زيست سازگار سريم اكسيد با تراشه ميكروفلوئيد
-
مقطع تحصيلي
كارشناسي ارشد
-
رشته تحصيلي
مهندسي پزشكي
-
سال تحصيل
1399-1400
-
تاريخ دفاع
1400/03/03
-
استاد راهنما
ساسان آسيايي
-
دانشكده
مهندسي مكانيك
-
چكيده
نانوذرات سريم اكسيد كاربردهاي گسترده¬اي در حوزه پزشكي دارند. اندازه ذرات، شكل و غلظت نانوسريا براي استفاده بيولوژيكي و زيست¬سازگاري آن¬ها اهميت زيادي دارد. روش توليد نانوذرات سريم اكسيد نقش مهمي در تعيين شكل، اندازه ذرات و غلظت آن ايفا مي¬كند. در اين مطالعه، اثر پارامترهاي موثر مانند سرعت و غلظت بر روي توليد بيشترين مقدار سريم اكسيد از مواد اوليه، تعيين اندازه ذرات، پراكندگي و درصد كريستالي بودن ذرات شبيه¬سازي، آزمايش و بررسي شد. از آنجايي كه كنترل نانوذرات توليد شده با روش¬هاي مختلف به چالشي مهم تبديل شده، براي كنترل اندازه ذرات سريم اكسيد از روشي آسان و بسيار موثر كه به كارگيري تراشه ميكروفلوئيد است، استفاده شد. مطالعه داراي دو بخش شبيه¬سازي و تجربي است كه در آن¬ها، از ميان روش¬هاي موجود براي توليد نانوذرات، روش هم¬رسوبي برگزيده شد. از سريم نيترات و سديم هيدروكسيد به عنوان مواد اوليه براي توليد نانوذرات سريم اكسيد استفاده شد. شبيه¬سازي در نرم افزار كامسول انجام گرفت و از دو ماژول Laminar flow و Transport of Diluted Species(TDS) براي بررسي پارامترها استفاده شد و براي تحليل و بررسي آزمايش تجربي از نمونه¬ها تست XRD گرفته شد. نتايج حاصل از اين مطالعه نشان داد كه استفاده از ميكروچيپ روشي موثر براي كنترل اندازه نانوذرات است و افزايش غلظت سديم هيدروكسيد سبب كامل شدن واكنش و توليد حداكثر سريم اكسيد و كاهش سرعت واكنش¬دهنده¬ها سبب كاهش پراكندگي، افزايش كريستالي بودن ذرات و افزايش اندازه ذرات توليد شده مي¬شود. ذرات كلوئيدي زرد رنگ توليد شده در اين روش، با توجه به معادله شرر حاوي نانوذرات سريم اكسيد با اندازه ذرات 1.5-1 نانومتر و 85 درصد ذرات كريستالي مي¬باشد.
-
تاريخ ورود اطلاعات
1400/03/05
-
عنوان به انگليسي
Synthesis of Biocompatible Nanoparticles of Cerium Oxide with Microfluidic Chip
-
تاريخ بهره برداري
5/24/2022 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
محدثه شهرياري پور
-
چكيده به لاتين
Cerium oxide nanoparticles have a wide range of applications in medicine. The particle size, shape and concentration of nanocells are very important for their biological use and biocompatibility. The production method of cerium oxide nanoparticles plays an important role in determining the shape, particle size and concentration. In this study, effective parameters such as velocity and concentration on maximum efficiency, particle size determination, dispersion and crystallinity of particles were simulated, tested and investigated. Since the control of nanoparticles produced by different methods has become an important challenge, a simple and very effective method was used to control the particle size of cerium oxide, which is the use of microfluidic chips. Among the existing methods for the production of nanoparticles, the co-precipitation method was chosen. Cerium nitrate and sodium hydroxide were used as raw materials to produce cerium oxide nanoparticles. The simulation was performed in Comsol software and two modules Laminar flow and Transport of Diluted Species (TDS) were used to examine the parameters. XRD test was taken from the samples for analysis and experimental testing. The results of this study showed that the use of microchips is an effective way to control the size of nanoparticles. Increasing the concentration of sodium hydroxide completes the reaction and produces maximum cerium oxide, and decreasing the rate of the reactants reduces the dispersion, increases the crystallinity of the particles, and reduces the particle size produced. The yellow colloidal particles produced in this method, according to the Scherer equation, contain cerium oxide nanoparticles with a particle size of 1-1.5 nm and 85% crystalline particles.
-
كليدواژه هاي فارسي
نانوذرات , تراشه ميكروفلوئيد , سريم اكسيد , نانوسريا , روش همرسوبي
-
كليدواژه هاي لاتين
nanoparticles , microfluidic chip , Cerium oxide , Co-precipitation method , Ceria nanoparticles
-
لينک به اين مدرک :