-
شماره ركورد
25646
-
پديد آورنده
رحمان عابدين پور
-
عنوان
تميزكاري سطوح فلزي (اكسيد آهن) با ليزر
-
مقطع تحصيلي
كارشناسي ارشد
-
رشته تحصيلي
فيزيك
-
سال تحصيل
1400
-
تاريخ دفاع
1400/8/5
-
استاد راهنما
مهدي شايگان منش
-
دانشكده
فيزيك
-
چكيده
پژوهش انجام شده، شبيه سازي تميزكاري ليزري زنگ آهن مي¬باشد. تميزكاري ليزري به دليل مزيت¬هاي ويژه خود امروزه مورد توجه صنايع مختلف در پردازش مواد قرار گرفته است. در مطالعه و پژوهشي كه در اينجا انجام داده¬ايم از شبيه سازي تميزكاري ليزري در نرم¬افزار شبيه¬ساز كامسول استفاده كرديم. شبيه سازي اين امكان را فراهم ميكند تا تمام زواياي مسئله را بررسي كنيم و مشكلات تميزكاري ليزري را پيش-بيني نماييم. در اين بررسي¬ها مي¬خواهيم تميزكاري ليزري با عمل فرسايش يا كندوكاش را مدل كنيم تا دريابيم كه چگونه مي¬شود فرسايش را قبل از انجام عملي، مدل كرد و براي هر نوع ماده، چه نوع ليزري مي-تواند بهترين عملكرد را داشته و بهتر پاسخ دهد تا از آسيب هاي احتمالي كه ممكن است به بستر ماده وارد شود جلوگيري شده و در وقت براي آزمون و خطا هم صرفه¬جويي شود. ماده¬اي كه براي تميز كردن در نظر گرفتيم زنگ آهن مي¬باشد؛ زيرا زنگ آهن امروزه يكي از دغدغه¬هاي جدي در صنايع مختلف است.
در اين پژوهش از دو روش شبيه سازي تميزكاري ليزري استفاده كرديم. در روش نخست كه معادلات را بر اساس تميزكاري ليزري با عمل فرسايش حل نموديم؛ با توجه به شبيه سازي تميزكاري ليزري بر روي زنگ آهن با پارامترهاي ليزر بيشينه شدت مركزي W/cm2 100 و W/cm2 200، شعاع باريكه ليزر cm 1 و cm 2 و پالس ns 5 با فاصله زماني ns 10 براي زنگ آهن به ضخامت mm 2 همان گونه كه انتظار مي¬رفت، ديده شد كه هرچه شدت بيشينه مركزي ليزر و شعاع باريكه ليزر افزايش يابد سرعت تميز كردن و راندمان تميزكاري افزايش مي¬يابد. همچنين نمودارهاي تغيير دما و عمق ماده (لايه برداري) برحسب زمان نيز به ما در درك چگونگي توزيع دما در ماده و انجام تميزكاري ليزري كمك ¬كرد. روش ديگري نيز براي تميزكاري ليزري يك لايه نازك زنگ آهن بر اساس شرط گسيلندگي انجام شد. در اين روش يك لايه نازك زنگ آهن با ليزري به توان KW 2 و شعاع cm 1 و پهناي پالس ns 5 و فاصله زماني ns 10 به صورت زيگزاگ در مدت s 10 يك ورق نازك آهن زنگ¬زده شده به طول و عرض cm 10 را پاكسازي نمود.
-
تاريخ ورود اطلاعات
1400/08/29
-
عنوان به انگليسي
Laser cleaning of metal surfaces (iron oxide)
-
تاريخ بهره برداري
10/27/2022 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
رحمان عابدين پور
-
چكيده به لاتين
The research is a simulation of laser cleaning of iron rust. Due to its special advantages, laser cleaning has been considered by various industries in material processing. In the study and research we have done here, we used laser cleaning simulation in Comsol simulator software. Simulation makes it possible to examine all angles of the problem and predict laser cleaning problems. In these studies, we want to model laser cleaning by abrasion or digging to find out how erosion can be modeled before the procedure, and for each type of material, what type of laser can perform best and respond best. To prevent possible damage to the material bed and save time for trial and error. The material we used for cleaning is iron rust; because iron rust is one of the concerns of many different industries today.
In this study, we used two methods of laser cleaning simulation. In the first method, according to the simulation of laser cleaning on iron rust with laser parameters of maximum central intensity 100 W/cm2 and 200 W/cm2, laser beam radius of 1 cm and 2 cm and pulse width of 5 ns with time interval of 10 ns for rust Iron with a thickness of 2 mm was found that the higher the maximum central intensity of the laser and the radius of the laser beam, the faster the cleaning speed and cleaning efficiency. Also, diagrams of temperature change and material depth (peeling) over time helped us to understand how the temperature is distributed in the material and to perform laser cleaning. Another method was performed for laser cleaning of a thin layer of iron rust based on the emission condition. In this method, a thin layer of iron rust with a power of 2 kW and a radius of 1 cm and a pulse width of 5 ns and a time interval of 10 ns in the form of a zigzag in 10 s clears a thin sheet of rusted iron with a length and width of 10 cm Appeared.
-
كليدواژه هاي فارسي
شبيه سازي تميزكاري ليزري با عمل فرسايش
-
كليدواژه هاي لاتين
Simulation of laser cleaning with Ablation action
-
لينک به اين مدرک :