-
شماره ركورد
26121
-
پديد آورنده
سيد محمد حسين ميرباقري
-
عنوان
مطالعه عددي اثر آرايش ميخكوبي در كنجهاي بيرون زده تحت بار ديناميكي
-
مقطع تحصيلي
كارشناسي ارشد
-
رشته تحصيلي
رشته مهندسي عمران گرايش ژئوتكنيك
-
سال تحصيل
1398
-
تاريخ دفاع
1400/11/20
-
استاد راهنما
دكتر عليرضا سعيدي عزيزكندي، دكتر محسن صابرماهاني
-
دانشكده
مهندسي عمران
-
چكيده
در سالهاي اخير با رشد روزافزون پروژههاي عمراني و لزوم تأمين فضاهاي عمومي بيشتر و بهره مندي از سطوح بالاتر رفاه اجتماعي، علاقهمندي به استفاده از فضاهاي زيرزميني به قصد تأمين پاركينگ و مشاعاتي با كاربريهاي اجتماعي، ورزشي و رفاهي زياد شده است. از طرفي بسياري از مشكلات مهندسي عصر حاضر مربوط به پيچيدگيها و تنوع هندسه گود در محيطهاي شهري است كه سبب ميشود به دليل كمبود فضا، مجريان نيازمند پايدارسازي گود با كنج محدب باشند. در برخي موارد در كنجهاي محدب تغييرشكل پيشبيني شده از روشهاي مبتني بر كنج مقعر متفاوت بود و يا ترك در سطح ديواره گود مسلح شده مشاهده شده است كه اين ميتواند ناشي از عدم شناخت كافي نسبت به رفتار اين دست از كنجها باشد.
در اين پژوهش تلاش بر اين است كه با مطالعه عددي و با استفاده از اجزا محدود آرايش ميخها در كنج محدب، تاثير بارديناميكي بر پايداري اين گروه از شيروانيها بررسي گردد. بدين منظور، از مدلسازي عددي سه بعدي در نرم افزار آباكوس استفاده شد. اعتبارسنجي مدل، توسط مقايسه نتايج بدست آمده از شبيه سازي عددي با نتايج آزمايشهاي سانتريفيوژ استاتيكي و ديناميكي موجود در ادبيات فني صورت گرفت. مقايسههاي صورت گرفته نشان داد كه مدل اجزاي محدود ايجاد شده قادر است رفتار سيستم ميخكوبي را با دقت قابل قبولي شبيه سازي كند. بر اين اساس، در ادامه از مدل صحت سنجي شده جهت انجام مجموعهاي از مطالعات پارامتريك با هدف بررسي عواملي همچون زاويه كنج، اثر فركانس و شتاب ورودي، طول و زاويه ميخها بر روي رفتار ديناميكي ديواره ميخكوبي شده و تغييرمكانهاي ايجاد شده استفاده شد.
بر اساس نتايج مدل هاي اين پايان نامه كه با يافته هاي پژوهش استاتيكي مرادي و همكاران (2020) همخواني داشت، با عدم چشم پوشي از اثر كنج در طراحي لرزه اي ديوارهاي ميخكوبي شده در كنج هاي بيرون زده طرح ارائه شده محافظه كارانه است و پيشنهاد شده كه تغييرشكل ديوار محدب بر اساس ضوابط آيين نامه اي ديوار تخت كنترل شود.
-
تاريخ ورود اطلاعات
1400/12/03
-
عنوان به انگليسي
Numerical Study Of Nail Arrangement On Convex Corner Under Dynamic Loads
-
تاريخ بهره برداري
2/9/2023 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
سيدمحمدحسين ميرباقري
-
چكيده به لاتين
In recent years, with the increasing growth of construction projects and the need for more public space and benefiting from the highest level of social welfare, there is more interest in using underground space to use parking and common areas with social and sports uses. On the other hand, many modern engineering problems are related to the complexity and diversity of slopes geometry in urban environments, which makes contractors need to stabilize walls including convex corners due to lack of space. In some cases, the predicted deformation in convex angles was different from the concave angle-based methods, or cracks were observed in the surface of the reinforced wall, which may be due to insufficient knowledge of the behavior of such angles.
In this research, an attempt has been made to study the effect of dynamic load on the stability of this group of embankments by using finite elements of nail arrangement in convex corners. For this purpose, three-dimensional numerical modeling was used in Abacus software. The model was validated by comparing the results obtained from numerical simulations with the results of static and dynamic centrifuge laboratory tests in the technical literature. Comparisons showed that the finite element model created was able to simulate the behavior of the nailing system with acceptable accuracy. Then, the validated model was used to perform a series of parametric studies with the aim of investigating factors such as convex corner angle, the effect of input frequency and acceleration, length and angle of nails on the dynamic behavior of the nailed wall.
The results of the models of this study showed us that in general, by ignoring the effect of the corner in the seismic design of the soil-nailed walls in the convex corners, the proposed design is conservative and it is suggested that the deformation of the convex wall be controlled according to the regulations of the flat wall.
-
كليدواژه هاي فارسي
ميخ كوبي خاك , كنج بيرون زده , روش اجزاي محدود , نرم افزار آباكوس , ديناميكي
-
كليدواژه هاي لاتين
Soil nailing , Convex corner , Finite element method , Abaqus software , Dynamic
-
Author
سيدمحمدحسين ميرباقري
-
SuperVisor
سيدمحمدحسين ميرباقري
-
لينک به اين مدرک :