• شماره ركورد
    27112
  • پديد آورنده

    محمد مهدي ايقائي

  • عنوان
    تخمين زمان شروع خوردگي بتن با پوشش‌هاي متفاوت
  • مقطع تحصيلي
    كارشناسي ارشد
  • رشته تحصيلي
    مهندسي و مديريت ساخت
  • سال تحصيل
    1401
  • تاريخ دفاع
    1401/06/09
  • استاد راهنما
    دكتر شايانفر
  • استاد مشاور
    دكتر قانوني‌بقاء
  • دانشكده
    مهندسي عمران
  • چكيده
    همه ساله در جهان ميلياردها دلار صرف تعمير و نگهداري سازه‌هاي بتني مي‌شود كه علي‌رغم اين تلاش‌ها بازهم بسياري از اين ساختمان‌ها به دلايل مختلفي ازجمله خوردگي از چرخه خدمت‌رساني خارج مي‌شوند. با اين حساب محققين بسياري دركشور هاي مختلف تلاش نموده‌اند تا بر اين مشكل فائق آيند و روش‌هاي گوناگوني نيز براي آن ارائه نموده‌اند. يكي از بهترين روش‌هايي كه تاكنون ارائه گرديده است، استفاده از پوشش‌هاي غشايي آلي بوده كه نه‌تنها بر دوام ساختمان‌هاي بتني مي‌افزايد بلكه جنبه تزئيني نيز دارد. از اين‌رو در اين پژوهش تلاش گرديده است تا ضمن بررسي روش‌هايي جهت تخمين دوام سه نوع از اين پوشش‌ها، يعني اپوكسي (EP)، پلي اورتان (PU)و لاستيك آغشته به كلر (CR)، صرفه اقتصادي آن‌ها نيز از دو جهت هزينه اوليه و مدت زمان پوشش‌دهي مجدد مورد مطالعه قرار گيرد. اين روش‌ها ضمن در نظر گرفتن اثرات پيري پوشش‌ها، با استفاده از روش آماري مونت‌كارلو و جدول توزيع نرمال استاندارد بر بهبود نتايج حاصل از اين پژوهش افزوده‌اند. بر اين اساس، نتايج به دست آمده حاكي از دوام 39/1 سال براي پوشش اپوكسي، 11/2 سال براي پوشش پلي‌اورتان و 08/1 سال براي پوشش لاستيك آغشته به كلر در شرايط كوتاه مدت و بدون پوشش‌دهي مجدد هستند. در صورت در نظر گرفتن عمر خدمت دهي 50 ساله، اعداد 49، 9/50 و 6/48 سال به ترتيب براي پوشش‌هاي اپوكسي، پلي‌اورتان و لاستيك آغشته به كلر به دست مي‌آيند. دوام‌هاي به دست آمده براي هر دو شرايط عمر خدمت‌رساني كوتاه مدت و بلند مدت در اين پژوهش در مقايسه با شرايط ثابت در نظر گرفتن ضخامت اعداد كمتري را نشان مي‌دهند كه اين امر به خاطر كاهش ضخامت در برخي نقاط پوشش و آسيب‌پذيري بيشتر اين مناطق در مقايسه با نقاط با حداقل پوشش ميانگين است. همچنين از نكات حائز اهميت، تاكيد ويژه اين پژوهش بر شرايط آب و هوايي حاكم بر نيمه شمالي كشور، به‌ويژه استان‌هاي ساحلي درياي خزر بوده است.
  • تاريخ ورود اطلاعات
    1401/07/12
  • عنوان به انگليسي
    Estimation of the start time of concrete corrosion with different coatings
  • تاريخ بهره برداري
    8/31/2023 12:00:00 AM
  • دانشجوي وارد كننده اطلاعات

    محمدمهدي ايقائي

  • چكيده به لاتين
    Every year in the world, billions of dollars are spent on the repair and maintenance of concrete structures. despite these efforts, many of these buildings are out of service due to various reasons, including corrosion. With this introduction, many researchers in different countries have tried to overcome this problem and have presented various methods for it. One of the best methods that has been presented so far is the use of organic film coatings, which not only increases the durability of concrete buildings, but also has a decorative aspect. Therefore, in this thesis, an attempt has been made to study the methods to estimate the durability of this type of coatings include Epoxy (EP), Polyurethane (PU) and Chlorinated rubber (CR) and their economic efficiency in terms of the initial cost and the duration of repainting. These methods, while considering the aging effects of the coatings, have improved the results by using the Monte Carlo statistical method and the standard normal distribution table. Based on this study obtained results indicate the durability of 1.39 years for epoxy coating, 2.11 years for Polyurethane coating and 1.08 years for Chlorinated rubber in short time conditions without repainting. with considering the 50 years these numbers are 49, 50.9 and 48.6 tears for (EP), (PU) and Chlorinated rubber (CR) in order. The durability obtained for both short-term and long-term service life conditions in this thesis show lower numbers compared to the conditions considering the thickness constant, which is due to the reduction of thickness in some coating points and the greater vulnerability of these areas in comparison. Also, one of the important points is the special emphasis of this thesis on the weather conditions governing the northern half of the country, especially the coastal provinces of the Caspian Sea.
  • كليدواژه هاي فارسي
    خوردگي , نفوذ يون كلريد , كربناسيون , پوشش غشايي آلي , ضخامت معادل بتني
  • كليدواژه هاي لاتين
    Corrosion , chloride ion penetration , carbonation , organic film coating , concrete equivalent thickness
  • Author
    Mohammad Mahdi Ighaei
  • SuperVisor
    Dr. Shayanfar