• شماره ركورد
    27879
  • پديد آورنده

    سعيد حميده

  • عنوان
    طراحي، شبيه سازي و ساخت مبدل DC-DC سه درگاهي
  • مقطع تحصيلي
    كارشناسي ارشد
  • رشته تحصيلي
    راه‌آهن برقي
  • سال تحصيل
    1399-1401
  • تاريخ دفاع
    1401/11/18
  • استاد راهنما
    دكتر سيد سعيد فاضل
  • دانشكده
    راه‌آهن
  • چكيده
    دراين پروژه يك مبدل DC-DC سه‌درگاهي شامل منبع ورودي(صفحه خورشيدي)، منبع ذخيره انرژي(باتري) و بار پيشنهاد شده است. درابتدا مبدل‌هاي سه‌درگاهي شامل عملكرد، كنترل، ساختار، قابليت انتقال توان دوطرفه، عناصر استفاده شده(تعداد كليدها، خازن‌ها و ادوات مغناطيسي) و بازدهي كلي مبدل بررسي مي‌شود. مبدل پيشنهادي انتخاب شده به طراحي آن پرداخته شده است، پس از محاسبات طراحي به بررسي حالت‌هاي انتقال توان و كليدزني مبدل اشاره شده‌است و با توجه آن كنترل مناسب اعمال مي‌شود. پس از آن به مدلسازي بخش باك_بوست مبدل پرداخته‌ مي‌شود. سپس به طراحي ادوات قدرت(سلف، خازن، انتخاب ماسفت و ديگر قطعات قدرت) پرداخته شده است. در ادامه براي بررسي عملكرد درست سيستم، مبدل مدنظر را در محيط نرم‌افزاري متلب (MATLB) از جهات گوناگون به خصوص به دليل استفاده از شبكه رزونانس از لحاظ بازده مورد بررسي كامل قرار مي‌گيرد. در نهايت يك مبدل سه‌درگاهي با شبكه رزونانس LC با روش كنترلي مدلاسيون عرض پالس و كنترل شيفت فاز جهت بررسي كاركرد عملي تحليل و بررسي شده است. كليدزني نرم، بازده بالا و چگالي توان بالا از ويژگي‌هاي برتر اين مبدل است.
  • تاريخ ورود اطلاعات
    1401/11/25
  • عنوان به انگليسي
    design , simulation and construction of a three - port dc - dc converter for use in electric vehicles (TPC)
  • تاريخ بهره برداري
    2/7/2024 12:00:00 AM
  • دانشجوي وارد كننده اطلاعات

    سعيد حميده

  • چكيده به لاتين
    protecting the environment and protecting energy have caused the development of electrical vehicles. recent advances in renewable energy systems based on renewable energy, hybrid vehicles, aerospace systems, smart grid systems, renewable energy networks and portable devices have brought challenges for the design of dc-dc energy conversion systems. photovoltaic systems with rechargeable batteries are complex and expensive, because various transducers are necessary to regulate the load, solar panels and batteries. in this thesis, two - way non - isolated multi-port converters with combined control method including pwm and phase shift are investigated which will cause load, solar panels and battery. one of the goals of this converter is to reduce the number of keys, reduce costs and simplicity of system and efficiency. in order to extract the mathematical model of gain properties and scope of zvs operation, exact operation analysis has been done. optimal control is also considered for the case that the battery is in the discharge mode and the solar panel is removed from the circuit. first, a review of the types of three - port converters is reviewed and then the proposed converter is investigated in terms of switch, inductors, capacitors, etc. in order to perform the correct operation of the converter, the proposed converter is fully investigated in different directions, especially due to the use of resonance network in terms of efficiency.
  • كليدواژه هاي فارسي
    مبدل سه‌درگاهي , باتري , فتوولتائيك , مبدل دوطرفه , كنترل مدولاسيون عرض پالس , كنترل شيفت فاز
  • كليدواژه هاي لاتين
    three port converter , battery , Photovoltaic , bidirectional converter , Pulse width modulation control , phase shift control
  • Author
    saeed hamide
  • SuperVisor
    saeed fazel