-
شماره ركورد
30170
-
پديد آورنده
احمدرضا جهانيان
-
عنوان
طراحي و ساخت سيستم خودكار انجام تست پاپ اسمير بوسيله پلتفرم ميكروسيالات سانتريفيوژ
-
مقطع تحصيلي
كارشناسي ارشد
-
رشته تحصيلي
مهندسي پزشكي
-
سال تحصيل
1399
-
تاريخ دفاع
1402/6/29
-
استاد راهنما
دكتر مهدي نويدبخش و دكتر اسمعيل پيش بين
-
دانشكده
مهندسي مكانيك
-
چكيده
ميكروسيالات زمينه اي است كه به سرعت در حال پيشرفت و تكامل است كه بر استفاده از حجم بسيار كمي از سيالات، معمولاً در محدوده ميكروليتر يا نانوليتر، تمركز دارد. اين كوچك سازي مهندسي شده به ما كمك ميكند تست هاي بسياري را با هزينه و زمان كمتر، قابليت جابجايي بيشتر و اشغال فضاي كمتر انجام دهيم. سرطان دهانه رحم كه چهارمين سرطان شايع بين زنان مي باشد، سالانه حدودا 500000 مبتلاي جديد را درگير ميكند. تست پاپ اسمير اولين قدم در شناسايي اين سرطان از طريق مشاهده نمونه سلولي رنگ آميزي شده زير ميكروسكوپ مي باشد كه توانسته حجم زيادي از شيوع بيشتر اين سرطان را كنترل كند. باتوجه به وقتگير بودن اين تست و نياز به اپراتور آزمايشگاهي براي انجام پروسه تست، نياز به يك دستگاه براي انجام اين تست و كنترل آن مسئله اي مهم مي باشد. در اين پژوهش براي تست پاپ اسمير پلتفرمي طراحي و ساخته شده كه قادر است نمونه سلولي را طبق پروتكل آزمايشگاهي رنگ آميزي نمايد و نياز انجام اين تست به اپراتور را از بين برده و با خودكار سازي اين پروسه، پاتولوژيست را از انجام روتين آزمايشگاهي بي نياز مي سازد. با پيشنهاد يك دريچه بصورت كاملا اختصاصي بر اساس آهنربا و تيغه، مراحل ساخت و بهينه سازي انجام شد و در نهايت اسمير سلولي كشيده شده روي لامل رنگ آميزي گشت. اين نتايج با نتايج آزمايشگاهي مقايسه شد و پاتولوژيست نمونه هاي رنگ شده توسط دستگاه را مناسب ارزيابي براي شناسايي سلول هاي سرطاني دانست.
-
تاريخ ورود اطلاعات
1402/09/15
-
عنوان به انگليسي
Design and manufacture of an automated device for pap smear test on a centrifugal microfluidic platform
-
تاريخ بهره برداري
1/1/1900 12:00:00 AM
-
دانشجوي وارد كننده اطلاعات
احمدرضا جهانيان
-
چكيده به لاتين
Microfluidics is a rapidly evolving field that focuses on the use of minimal volumes of fluids, typically in the microliter or nanoliter range. This engineered miniaturization helps us perform many tests while reducing cost and time, more portability, and less space. Cervical cancer, which is the fourth most common cancer among women, affects about 500,000 new patients every year. The Pap smear test is the first step in identifying this cancer through observing the stained cell sample under the microscope, which has been able to control the spreading of this cancer. Considering the time-consuming nature of this test and the need for a laboratory operator to perform the test process, the need for a device to perform the test is an important issue. In this research, a platform has been designed and built for the Pap smear test, which is capable of staining the cell sample according to the laboratory protocol, eliminating the need for an operator to perform this test, and by automating this process, the pathologist is free from unnecessary laboratory routines. With the suggestion of a completely exclusive valve based on magnets and blades, the manufacturing and optimization steps were carried out and finally, the cell smeared on the coverslip was stained. The results were compared with the laboratory results and the pathologist considered the samples stained by the device suitable for evaluation to identify cancer cells.
-
كليدواژه هاي فارسي
ميكروسيالات , ميكروسيالات سانتريفيوژ , پاپ اسمير , سرطان دهانه رحم
-
كليدواژه هاي لاتين
microfluidics , centrifugal microfluidics , cervical cancer , pap smear
-
Author
ahmad reza jahanian
-
SuperVisor
dr. mahdi navidbakhsh and dr. esmail pishbin
-
لينک به اين مدرک :